|
The Marshall 290 Series integral two-stage regulator is a high pressure regulator combined with a second stage regulator.
FeaturesThe high pressure regulator reduces
the cylinder pressure within 10-15 PSIG range. The second stage then
reduces this inlet pressure down to 11 inches of water column (0.4 PSIG)
outlet pressure.
Two-stage regulation results in a consistent inlet pressure to the second
stage, thereby minimizing minor outlet pressure variations from the
second stage regulator.
SpecificationsZinc Die Cast.
Fabric reinforced high pressure & second stage diaphragms.
Second stage relief mechanism per UL144.
Mounting holes 3-1/2" on centre.
BTY capacity (propane): 160,000 BTU/HR1.
Inlet 1/4" FNPT.
Outlet 3/8" FNPT. (connects to m-BSP-3/8)
Weight 1.09Lbs.
Dimensions 6" x 3-1/8" x 2-5/8".
|