|
Shower- External Recessed Wall Type. Hot and cold water. Suitable for external fitting to annexes, shower tents etc, with keyed lock security.
FeaturesThe unit screws into the cutout from the outside face. Screws are covered when the lockable door is closed. You require a space behind wall, of 100mm deep (includes wall thickness) to accommodate the shower and the rear pipe connections. The hot and cold pipes connect at the rear to 1/2 BSP male water pipe fittings (The same as all shower rose connections). The Shower rose can be hand held, as shown in photo or the angle connector can be added between the hose and the shower rose to allow it to be positioned (and removed) on the wall mount bracket shown.
SpecificationsThe external access door is in off-white plastic.
Cut out size: 152mm height x 280mm width.
To fit this unit, cut a hole in the wall 152 x 280mm (either horizontal or vertical).
CommentsThe key comes taped to the outside of the body, but is not immediately obvious.
|
