Click to enlarge

Replacement round corner insect screens 280h x 1524w (Usually below a square).

Measurements reflect the size of the opening in the vehicle and not the actual insect screen size. This is best measured from inside the vehicle. The screen is approximately 20mm less than the stated window size. See below.

All single hopper and the lower screens of double hopper windows have round bottom corners.

Many double hopper windows have a SQUARE screen at the top.

The MIDGE screens (when shown in title) have a very fine weave to prevent very small insects, but do reduce ventilation.

Installation:
1) Wind out window completely.
2) Peel off old ones from outside, clean aluminium.
3) During summer, use as they come, in winter place in bucket of hot water to soften and remove any creases.
4) Place top corners into place, press with finger (or carefully with a flat screw driver). Slide finger or flat screw driver along top edge.
5) Work down either side and fit catches into gaps before doing base.

Specifications