|
Table Leg- Wineglass Bent Tube in grey. Four pieces make up this table. It has a removable base which can be bolted or unbolted from floor with a finger bolt inside base.
FeaturesCentre Bent tube section removes to fold table down, and allows the table to rotate in an offset method to give greater clearance.
The top is removable with a finger knob.
This does NOT include a table top, these must be individually made by the customer.
SpecificationsTable leg height is 700mm and base diameter is 430mm.
The top plate is 300mm x 170mm
The pipe is 45mm outside Diameter.
The pipe offset is 200mm.
|